Tel: 0086-21-35359336 35359337
| Description | Unit | Parameter value | |
| Max. drilling diameter | mm | 2500 | |
| Max. drilling depth | m | 102 | |
| Allowable luffing scope (from center of drill rod to slewing center) | mm | 4410～4950 | |
| Drilling rig dimension in working condition (L × W × H) | mm | 11000×4800×24586 | |
| Drilling rig dimension in transport condition (L × W × H) | mm | 17380×3500×3810 | |
| Weight of overall unit (standard configuration, excluding drilling tool) | t | 92 | |
| Engine | Model | CUMMINS QSM11-C400 | |
| Rated power/speed | kW | 298/（2100r/min） | |
| Max. working pressure of hydraulic system | MPa | 35 | |
| Rotary drive | Max. torque | kN •m | 360 |
| Rotational speed | r/min | 5～20 | |
| Crowd cylinder | Max. Pushing force | kN | 240 |
| Max. Pulling force | kN | 320 | |
| Max.stroke | mm | 6000 | |
| Main winch | Max.pulling force | kN | 320 |
| Max. single-rope speed | m/min | 72 | |
| Diameter of the steel wire rope | mm | 36 | |
| Auxiliary winch | Max.pulling force | kN | 100 |
| Max. single-rope speed | m/min | 65 | |
| Diameter of the steel wire rope | mm | 20 | |
| Drilling mast | Left/right inclination of mast | ° | 4/4 |
| Front/back inclination of mast | ° | 5/15 | |
| Rotary table slewing angle | ° | 360 | |
| Traveling | Max. traveling speed of the overall unit | km/h | 1.5 |
| Max. climbable gradient of the overall unit | % | 35 | |
| Crawler | Width of crawler plate | mm | 800 |
| External width of crawler (min.-max.) | mm | 3500～4800 | |
| Center distance between two longitudinal wheels of crawler | mm | 5175 | |
| Average ground pressure | kPa | 103.1 | |
